Fuji Xerox DocuPrint CM115 w - Page 74

74 Printer Connection and Software Installation
5 Click the plus (+) sign, and then click Default.
If Add Other Printer or Scanner (Add Printer or Scanner for OS X 10.8) is displayed, select Add Other
Printer or Scanner (Add Printer or Scanner for OS X 10.8), and then click Default.
Proceed to step 6.
6 Select the printer connected via USB from the Printer Name (Name for OS X 10.8) list.
Name, Location, and Print Using (Use for OS X 10.8) are automatically entered.
7 Click Add.
• When Using Bonjour
1 Turn on the printer.
2 Make sure that wireless connection is configured properly on your computer and printer.
3 Display System Preferences, and then click Print & Scan.
4 Click the plus (+) sign, and select the printer from Nearby Printers.
The printer will be added to Print & Scan.
If there are no printers in Nearby Printers, select Add Other Printer or Scanner (Add Printer or Scanner for
OS X 10.8), and then click Default.
Proceed to step 5.
5 Select the printer connected via Bonjour from the Printer Name (Name for OS X 10.8) list.
Name and Print Using (Use for OS X 10.8) are automatically entered.
NOTE:
• If AirPrint Printer (AirPrint for OS X 10.8) is automatically selected for Print Using (Use for OS X 10.8), select the
model of your printer for
Use manually.
6 Click Add.
• When Using IP Printing
1 Turn on the printer.
2 Make sure that wireless connection is configured properly on your computer and printer.
3 Display System Preferences, and then click Print & Scan.
4 Click the plus (+) sign, and then click IP.
If Add Other Printer or Scanner (Add Printer or Scanner for OS X 10.8) is displayed, select Add Other
Printer or Scanner (Add Printer or Scanner for OS X 10.8), and then click IP.
Proceed to step 5.
5 Select Line Printer Daemon - LPD for Protocol.
6 Enter the IP address of the printer in the Address area.
7 Select the model of your printer for Print Using (Use for OS X 10.8).
NOTE:
• When the printing is set up using IP printing, the queue name is displayed as blank. You do not need to specify it.
8 Click Add.