98 Printing Basics
2 After the even pages are printed, remove the paper stack from the center output tray.
NOTE:
• Warped or curled paper can cause paper jams. Straighten them before setting.
3 Stack the paper and set them as they are (with the blank side facing up) into the MPF, and then press the
button.
Pages are printed in the order of page 1 (back of page 2), page 3 (back of page 4), and then page 5 (back of
page 6).
NOTE:
• Printing on both sides of the paper is not possible if the document consists of various sizes of paper.
Loading Print Media in the Priority Sheet Inserter (PSI)
1 Print the even pages (back sides).
For a six-page document, back sides are printed in the order of page 6, page 4, then page 2.
The (Data) LED blinks and Insert Output to Tray Press [OK] Button to Continue Printing
appears on the LCD panel when the printer finishes printing the even pages.
2 After the even pages are printed, remove the paper stack from the center output tray.
NOTE:
• Warped or curled paper can cause paper jams. Straighten them before setting.
To Next Page
Loading...
