230 Scanning
When you are finished with printer configuration, go to "Sending the Scanned File to the Network" on
page 233.
3 Host Address (IP
Address or DNS Name)
Enter the name or IP address of the FTP server or your computer.
The following are examples:
• For Server FTP:
Server name: myhost.example.com
(myhost: host name, example.com: domain name)
IP address: 192.168.1.100
• For Computer SMB:
Server name: myhost
IP address: 192.168.1.100
4 Port Number Enter the server port number. If you are unsure, you can enter the
default value of 21 for FTP and 139 for SMB.
5 Login Name (if required
by host)
Enter the user account name that has access to the shared folder on
your computer or the FTP server.
6 Login Password Enter the password for the above login name.
NOTE:
• You cannot use an empty password for the Scan to Computer
feature. Ensure that you have a valid password for the user login
account. (See "Confirming the Login name and the Password" on
page 216 for details on how to add a password for your user login
account.)
7 Re-enter Password Re-enter your password.
8 Name of Shared
Directory
For Computer SMB only.
Enter the name of the shared folder on your computer where you
want to store scanned documents.
9 Subdirectory Path
(optional)
For Computer SMB
To store scanned documents simply in the shared folder specified for
Name of Shared Directory, leave this box blank.
To store scanned documents in a subfolder within the shared folder,
enter the path to the subfolder as shown in the example below.
Example: Shared folder name: MyShare, Second-level folder name:
MyPic, Third-level folder name: John
You should now see MyShare\Mypic\John in your directory.
In this case, enter for Subdirectory Path (optional) as follows:
\MyPic\John
For Server FTP
Enter the path to the FTP server where you want to store scanned
documents.
MyShare (Shared folder)
MyPic
John
To Next Page
Loading...
