Fuji Xerox DocuPrint M255 z User Manual

326 Using the Operator Panel Menus and Keypad
Fax Defaults
Use the Fax Defaults menus to configure a variety of fax features.
NOTE:
• The Fax service cannot be used unless you specify your region under Region. If Region is set to Unknown,
the message Set The Region Code appears on the LCD panel.
• Resolution
Purpose:
To specify the resolution level to be used for fax transmission.
Values:
NOTE:
• Faxes scanned in the SuperFine(203dpi) mode are received at the highest resolution of the remote machine.
• Document Type
Purpose:
To specify the default document type.
Values:
• Lighten/Darken
Purpose:
To specify the default fax density level.
Values:
Standard* Suitable for documents with normal sized characters.
Fine Suitable for documents containing small characters or thin lines or
documents printed with a dot-matrix printer.
SuperFine(203dpi) Suitable for documents containing extremely fine details. The
SuperFine(203dpi) mode is effective only when the remote tax
machine supports the super fine resolution. See the notes below.
SuperFine(406dpi) Suitable for documents containing photographic images.
* Factory default menu setting
Text* Suitable for documents with text.
Photo Suitable for documents with photos.
* Factory default menu setting
Lighten2 Makes the fax lighter than the source document. Works well with dark
print.
Lighten1
Normal* Works well with standard typewritten or printed documents.
Darken1 Makes the fax darker than the source document. Works well with light
print or faint pencil markings.
Darken2
* Factory default menu setting

Fuji Xerox DocuPrint M255 z Specifications

General

Brand	Fuji Xerox
Model	DocuPrint M255 z
Category	Printer
Language	English