Using the Operator Panel Menus and Keypad 327
• Delayed Start
Purpose:
This feature enables you to set a specific time for the fax transmission to start. Once Delayed Start
mode is activated, your printer stores all of the documents to be faxed into its memory and sends them
at the specified time. After faxing in the Delayed Start mode is complete, the data in the memory is
cleared.
Values:
NOTE:
• A maximum of 19 delayed fax jobs can be stored in this printer.
Print from USB Defaults
Use the Print from USB Defaults menus to configure the Print from USB Memory feature.
•2-Sided
Purpose:
To specify whether to print on either side of paper.
Values:
• Layout
Purpose:
To specify the output layout.
Values:
21:00*/PM 9:00* Specify the fax transmission start time when sending a fax at a
specified time. Which factory default menu setting displays depends
on the value set for Time Format under the System Settings
menu. See "Changing the Clock Mode" on page 248 for more
information.
0:00 - 23:59 / AM/PM 1:00
- 12:59
* Factory default menu setting
1->1-Sided Prints on a single side of paper.
Flip on Long Edge* Prints on either side of paper to be bound on the long edge.
Flip on Short Edge Prints on either side of paper to be bound on the short edge.
* Factory default menu setting
1UP*
2UP
4UP
* Factory default menu setting
To Next Page
Loading...
Need help?
General
