44 Basic Operation
Turning On the Printer
IMPORTANT:
• Do not use extension cords or power strips.
• Do not connect the printer to an uninterruptible power supply (UPS) system.
1 Connect one end of the power cord to the power connector on the rear of the printer (see "Rear
View" on page 41).
2 Connect the other end to a power source.
3 Turn on the printer.
NOTE:
• When you turn on the printer for the first time, follow the on-screen instructions on the LCD panel to
configure the initial settings of your printer.
See also:
• "Setting Initial Settings on the Operator Panel" on page 45
To Next Page
Loading...
