Faxing 271
To turn off the secure receiving mode:
1 Follow steps 1 through 6 in "To turn on the secure receiving mode:" to access the Secure
Receive Set menu.
2 Select Disable, and then press the button.
3 Press the (Back) button several times until the LCD panel shows Select Function.
îš„ Using an Answering Machine
You can connect a telephone answering device (TAD) directly to the rear of your printer as shown
above.
• Place your printer in the Ans/FAX Mode and specify for Auto Ans. Ans/FAX a period of time
before the TAD responds.
• When the TAD picks up an incoming call, the printer monitors and takes the line if it hears a fax
tone and then starts receiving the fax.
• When the TAD is turned off, the printer automatically enters the FAX Mode after a predefined
period of time.
• If you answer an incoming call and hear a fax tone, the printer will receive the fax in the following
cases:
– You set OnHook to On (you can hear a voice or a fax tone from the remote fax machine),
press the (Start) button, and then replace the handset.
– You press the two-digit remote receive code and replace the handset.
To th e
wall jack
Printer
Line
Telephone Answering Device
Phone
To Next Page
Loading...
Need help?
General
