308 Using the Operator Panel Menus and Keypad
• Alert Tone
Purpose:
To configure settings for tones emitted by the printer during operation or when a warning message
appears.
Values:
Panel Select
Tone
Off* Does not emit a tone when the operator panel input is correct.
Min Emits a tone at the specified volume when the operator panel
input is correct.
Middle
Max
Panel Alert
Tone
Off* Does not emit a tone when the operator panel input is
incorrect.
Min Emits a tone at the specified volume when the operator panel
input is incorrect.
Middle
Max
Auto Clear
Alert
Off* Does not emit a tone before the printer performs auto clear.
Min Emits a tone at the specified volume five seconds before the
printer performs auto clear.
Middle
Max
Job Tone Off Does not emit a tone when a job is complete.
Min Emits a tone at the specified volume when a job is complete.
Middle*
Max
Alert Tone Off Does not emit a tone when a problem occurs.
Min Emits a tone at the specified volume when a problem occurs.
Middle*
Max
Out of Paper Off Does not emit a tone when the printer runs out of paper.
Min Emits a tone at the specified volume when the printer runs out
of paper.
Middle*
Max
All Tones Off Disables all the alert tones.
Min Sets the volume of all the alert tones at once.
Middle*
Max
* Factory default menu setting
To Next Page
Loading...
