Scanning 233
Sending the Scanned File to the Network
1 Load a document(s) face up on the Automatic Document Feeder (ADF) with the top edge going
in first; or place a single document face down on the document glass and close the document
cover.
See also:
• "Making Copies From the Automatic Document Feeder (ADF)" on page 186
• "Making Copies From the Document Glass" on page 184
2 Press the (Scan) button.
3 Select Scan to Network, and then press the button.
4 Select Scan to, and then press the button.
5 Select Computer(Network), Server(FTP), or Search Address Book, and then press the
button.
Computer(Network): Stores scanned documents on the computer using the SMB protocol.
Server(FTP): Stores scanned documents on the server using the FTP protocol.
Search Address Book: Select the server address registered in the Address Book.
6 Select a destination to store the scanned documents, and then press the button.
7 If necessary, customize scan options.
8 Press the (Start) button to send a file containing the scanned document(s).
To Next Page
Loading...
