66 Printer Connection and Software Installation
Network Connection
To connect the printer to an Ethernet network:
1 Ensure that the printer, computer and any other connected devices have been turned off and all
cables have been disconnected.
2 Connect one end of an Ethernet cable to the Ethernet port on the rear of the printer, and the
other end to a LAN drop or hub.
NOTE:
• Do not connect the Ethernet cable when you intend to use the wireless network feature of the DocuPrint
M255 z model.
See also:
• "Configuring Wireless Network Settings (DocuPrint M255 z only)" on page 77
Ethernet port
To Next Page
Loading...
