234 Scanning
Scanning to a USB Storage Device
The Scan to USB Memory feature allows you to scan documents and save the scanned data to a USB
storage device. To scan documents and save them, follow the steps below:
1 Load a document(s) face up on the Automatic Document Feeder (ADF) with the top edge going
in first; or place a single document face down on the document glass and close the document
cover.
See also:
• "Making Copies From the Automatic Document Feeder (ADF)" on page 186
• "Making Copies From the Document Glass" on page 184
2 Insert a USB storage device into the front USB port on your printer.
USB Memory appears.
3 Select Scan to, and then press the button.
4 Select Save to USB Drive or a folder to save a file, and then press the button.
5 Select scanning options as required.
6 Press the (Start) button.
When the scan is complete, the LCD panel displays a prompt for another page. Select No or Yes,
and then press the button.
If you have selected Yes, select Continue or Cancel, and then press the button.
To Next Page
Loading...
