336 Using the Operator Panel Menus and Keypad
Changing the Language
To display a different language on the operator panel:
Using the Operator Panel
1 Press the (System) button.
2 Select Panel Language, and then press the button.
3 Select the desired language, and then press the button.
Using the Printer Setting Utility (Windows Only)
The following procedure uses Microsoft
®
Windows
®
7 as an example.
1 Click Start → All Programs → Fuji Xerox → Fuji Xerox Printer Software for Asia-Pacific →
your printer → Printer Setting Utility.
NOTE:
• The window to select a printer appears in this step, when multiple print drivers are installed on your
computer. In this case, click the name of the desired printer listed in Printer Name.
The Printer Setting Utility appears.
2 Click the Printer Maintenance tab.
3 Select System Settings from the list at the left side of the page.
The System Settings page is displayed.
4 Select the desired language from Panel Language, and then click the Apply New Settings
button.
To Next Page
Loading...
