Printer Connection and Software Installation 125
Specifying the Default Queue
• For Red Hat Enterprise Linux 6 Desktop (x86)
1 Select Applications → System Tools → Terminal.
2 Enter the following command in the terminal window.
• For SUSE Linux Enterprise Desktop 11 (x86)
1 Select Computer → More Applications..., and then select YaST on the Application Browser.
2 Enter the administrator password.
YaST Control Center is activated.
3 Select Printer from Hardware.
The Printer Configurations dialog box appears.
4 Click Edit.
A dialog box to modify the specified queue appears.
5 Confirm that the printer you want to specify as the default queue is selected in the Connection
list.
6 Select the Default Printer check box.
7 Confirm the settings, and then click OK.
• For Ubuntu 10 (x86)
1 Select System → Administration → Printing.
2 Select the printer you want to specify as the default queue.
3 Select the Printer menu.
4 Select Set As Default.
5 Select whether to set this printer as the system-wide default printer, and then click OK.
su
(Enter the administrator password)
lpadmin -d (Enter the queue name)
To Next Page
Loading...
