Using the Operator Panel Menus and Keypad 333
Limiting Access to Copy, Fax, Scan, and USB Direct
Print Operations
Enabling the Copy, FAX, Scan, and Print from USB lock options limits access to copy, fax, scan,
and USB direct print operations.
Taking the Copy lock option as an example, the following procedure explains how to enable or disable
the option. Use the same procedure to enable or disable the FAX, Scan, and Print from USB lock
options.
1 Press the (System) button.
2 Select Admin Menu, and then press the button.
3 Select Secure Settings, and then press the button.
4 Select Panel Lock, and then press the button.
5 Select Panel Lock Set, and then press the button.
6 Select Enable, and then press the button.
7 If necessary, select Change Password, and change the password using the numeric keypad.
Then, press the button.
NOTE:
• The factory-default panel password is 0000.
8 Press the (Back) button.
9 Select Service Lock, and then press the button.
10 Select Copy, and then press the button.
11 Select one of the following options, and then press the button.
• Unlocked
• Locked
• Password Locked
To Next Page
Loading...
Need help?
General
