Using the Operator Panel Menus and Keypad 297
• Initialize NVM
Purpose:
To initialize wired network data stored in Non-Volatile Memory (NVM). Enabling this feature and
rebooting the printer will reset all the wired network settings to their factory default values.
Values:
• PS Data Format
Purpose:
To set the PS data communications protocol. To make any changes effective, turn off the printer and
then turn it back on.
Values:
Yes Initializes the wired network data stored in NVM.
No* Does not initialize the wired network data stored in NVM.
* Factory default menu setting
Auto* Sets the PS data communications protocol automatically.
Standard Sets the PS data communications protocol to Standard.
BCP Sets the PS data communications protocol to BCP.
TBCP Sets the PS data communications protocol to TBCP.
* Factory default menu setting
To Next Page
Loading...
