332 Using the Operator Panel Menus and Keypad
Disabling the Panel Lock Feature
NOTE:
• You can select Disable for Panel Lock Set when all items under Service Lock are set to Unlocked
and Secure Receive Set is set to Disable.
1 Press the (System) button.
2 Select Admin Menu, and then press the button.
3 Enter the password, and then press the button.
4 Select Secure Settings, and then press the button.
5 Select Panel Lock, and then press the button.
6 Select Panel Lock Set, and then press the button.
7 Select Disable, and then press the button.
NOTE:
• The password is reset to 0000 when the setting for Panel Lock Set is changed from Enable to Disable.
To Next Page
Loading...
