54 Printer Management Software
Launcher (Windows Only)
Using the Launcher-Btype window, you can open the Status Window, Printer Setting Utility,
Troubleshooting, Address Book Editor, and Express Scan Manager.
To use the Launcher, select to install the Launcher when you install print drivers.
The following procedure uses Windows 7 as an example.
To start the Launcher:
1 Click Start → All Programs → Fuji Xerox → Fuji Xerox Printer Software for Asia-Pacific →
your printer → Launcher.
The Launcher-Btype window appears.
2 The Launcher-Btype window provides several buttons: Status Window, Printer Setting Utility,
Troubleshooting, Address Book Editor, and Express Scan Manager.
To exit, click the X button at the top-right of the window.
For more information, click the Help button/icon of each application.
Status Window Opens the Printer Status window.
See also:
• "SimpleMonitor (Windows Only)" on page 53
Printer Setting Utility Starts the Printer Setting Utility.
See also:
• "Printer Setting Utility (Windows Only)" on page 52
Troubleshooting Opens the Troubleshooting guide, which allows you to resolve issues
by yourself.
To Next Page
Loading...
