322 Using the Operator Panel Menus and Keypad
Scan Defaults
Use the Scan Defaults menus to configure a variety of scan features.
• Scan to Network
Purpose:
To store the scanned image on a network server or on a computer.
Values:
• File Format
Purpose:
To specify the file format to save the scanned image.
Values:
•Color
Purpose:
To set the color mode.
Values:
Computer(Network)* Stores the scanned image on a computer using the Server Message
Block (SMB) protocol.
Server(FTP) Stores the scanned image on a server using the FTP protocol.
* Factory default menu setting
PDF*
MultiPageTIFF
TIFF
JPEG
* Factory default menu setting
Black & White Scans in black and white mode. This is available only when File
Format is set to PDF or TIFF.
Grayscale Scans in grayscale mode.
Color* Scans in color mode.
Color(Photo) Scans in color mode. This is suitable for photographic images.
* Factory default menu setting
To Next Page
Loading...
Need help?
General
