Using the Operator Panel Menus and Keypad 321
• Margin Middle
Purpose:
To specify the value of the middle margin.
Values:
• Paper Error
Purpose:
To specify whether to display an error when the specified output paper size does not match the loaded
paper.
IMPORTANT:
• Printing repeatedly on the paper smaller than the specified output paper size may make the interior of your
printer dirty, which may result in poor print quality or breakdown in your printer.
Values:
0 mm*/0.0 inch* Specify the value in increments of 1 mm/0.1 inch. Which factory
default menu setting displays depends on the value selected for mm /
inch under the System Settings menu. See "mm / inch" on
page 309 for more information.
0-50 mm/0.0-2.0 inch
* Factory default menu setting
Off* Does not display an error when the specified output paper size does
not match the loaded paper.
On Displays an error when the specified output paper size does not
match the loaded paper.
* Factory default menu setting
To Next Page
Loading...
Need help?
General
