Copying 183
Preparing a Document
You can use the document glass or the Automatic Document Feeder (ADF) to load a source
document for copying, scanning and sending a fax. You can load up to 50 sheets of 64 gsm
documents for one job using the ADF or one sheet at a time using the document glass.
IMPORTANT:
• Avoid loading documents that are smaller than 148.0 × 210.0 mm (5.83 × 8.27 inch) or larger than 215.9 ×
355.6 mm (8.5 × 14 inch), different sizes or weights together, booklets, pamphlets, transparencies, or
documents having other unusual characteristics in ADF.
• Carbon-paper or carbon-backed paper, coated paper, onion skin or thin paper, wrinkled or creased paper,
curled or rolled paper or torn paper cannot be used in ADF.
• Do not use the documents with staples, paper clips or exposed to adhesives or solvent based materials such
as glue, ink and correcting fluid in ADF.
NOTE:
• To ensure the best scan quality, especially for color or gray scale images, use the document glass instead of
the ADF.
To Next Page
Loading...
