316 Using the Operator Panel Menus and Keypad
Scan to E-Mail
Use the Scan to E-Mail menu to edit the transmission source.
• Edit From Field
Purpose:
To enable or disable editing of the transmission source.
Values:
USB Settings
Use the USB Settings menu to change printer settings affecting a USB port.
•Port Status
Purpose:
To enable or disable the USB interface.
Values:
• PS Data Format
Purpose:
To set the PS data communications protocol. To make any changes effective, turn off the printer and
then turn it back on.
Values:
Disable Disables editing of the transmission source.
Enable* Enables editing of the transmission source.
* Factory default menu setting
Disable Disables the USB interface.
Enable* Enables the USB interface.
* Factory default menu setting
Auto* Sets the PS data communications protocol automatically.
Standard Sets the PS data communications protocol to Standard.
BCP Sets the PS data communications protocol to BCP.
TBCP Sets the PS data communications protocol to TBCP.
* Factory default menu setting
To Next Page
Loading...
