Printer Connection and Software Installation 89
12 Click Yes.
13 Wait a few minutes until the printer restarts to establish a wireless network connection and the
Configuration Complete screen appears.
14 Click Next.
15 Follow the on-screen instructions until the Check Setup screen appears.
16 Print the System Settings page using the operator panel.
See "Printing the System Settings Page" on page 175.
17 Confirm that "Link Quality" is shown as "Good", "Acceptable", or "Low" on the report.
NOTE:
• When "Link Quality" is shown as "No Reception", check if the wireless network settings are correctly
configured. To reconfigure the wireless network settings, click Return.
To Next Page
Loading...
