FujiFilm FF220002 - Flickerless S.s. Setting; Is Mode

176
6
The Shooting Menus
FLICKERLESS S.S. SETTING
Select ON to allow shutter speed to be  ne-tuned to reduce  ick-
er caused by LED lighting and the like.
Options
Options
ON OFF
N
This option takes e ect only in modes S and M.
IS MODE
Reduce blur caused by camera shake or subject motion.
Option
Option
Description
Description
L CONTINUOUS
+ MOTION
Image stabilization on. If + MOTION is selected, the camera
will adjust shutter speed to reduce motion blur when mov-
ing objects are detected.
l CONTINUOUS
M SHOOTING
+ MOTION
As above, except that image stabilization is performed only
when the shutter button is pressed halfway (focus mode
k only) or the shutter is released. If + MOTION is selected,
the camera will adjust shutter speed to reduce motion blur
when moving objects are detected.
m SHOOTING ONLY
OFF
Image stabilization off . Choose this option when using a
tripod.
N
•
+ MOTION has no e ect when sensitivity is set to a  xed value, and
may also be unavailable at some other combinations of settings. The
e ect may vary with lighting conditions and the speed at which the
object is moving.
•
The setting selected with the lens image stabilization switch, if any,
takes priority over the setting chosen with IS MODE.
•
Note that vibration or camera sounds may be noticeable as image
stabilization takes e ect.