266
Network/USB Features and Settings
8
CONNECTION MODE
Adjust settings for connection to external devices.
Option
Description
USB CARD READER
Connecting the camera to a computer via USB automatically
enables data transfer mode, allowing data to be copied to
the computer. The camera functions normally when not con-
nected.
USB WEBCAM
Connect the camera to a computer via USB for use as a
webcam.
USB TETHER
SHOOTING AUTO
The camera can be controlled from computers, gimbals,
drones, or other devices connected via USB. The camera au-
tomatically enters “tethered shooting” (i.e., remote-control)
mode when the external device is turned on and returns to
normal operation when the external device turned off or dis-
connected.
•
Photographs can be taken remotely and automatically
downloaded to computers running Capture One, Adobe®
Photoshop® Lightroom® + Tether Plugin, or FUJIFILM X
Acquire. FUJIFILM X Acquire can also be used to save and
load camera settings.
•
Remote photography and movie recording are available
when the camera is connected to a compatible device
such as a gimbal or drone. Use camera controls to switch
between still photography and movie recording. The fea-
tures available vary with the device connected.
To Next Page