260
Network/USB Features and Settings
8
RAW Processing
Using X RAW STUDIO, you can harness the power of the
camera’s image processing engine when processing RAW
pictures on a computer.
1
Select either AUTO or POWER SUPPLY OFF/COMM ON for
USB POWER SUPPLY/COMM SETTING in the network/USB
setting menu.
2
Select USB RAW CONV./BACKUP RESTORE for CONNECTION
MODE.
3
Connect the camera to the computer via USB and then turn
the camera on (P 253).
4
Launch X RAW STUDIO.
RAW processing can be performed using X RAW STUDIO.
N
Visit the website below for information on the software used.
https://fujifilm-x.com/products/software/
To Next Page
Loading...
