378
Technical Notes
12
Connections
Problem
Solution
The monitor is blank.
The camera is connected to a TV: Pictures will be displayed on
the TV instead of in the camera monitor (P 51).
Both the TV and camera
monitor are blank.
Q
EVF ONLY +
E is selected for VIEW MODE
SETTING: Put your eye to the viewfi nder or choose a
diff erent VIEW MODE SETTING option (P
14
).
No picture or sound
on TV.
•
The camera is not properly connected: Connect the camera
properly (P 51).
•
Input on the television is set to “TV”: Set input to “HDMI”
(P 51).
•
The volume on the TV is too low: Use the controls on the tele-
vision to adjust the volume (P 51).
The computer does not
recognize the camera.
Be sure the camera and computer are correctly connected
(P 253).
FUJIFILM X RAW STUDIO
or FUJIFILM X Acquire
fails to correctly detect
the camera.
Check the option selected for CONNECTION MODE
on the camera. Select USB RAW CONV./BACKUP
RESTORE before connecting the USB cable (P 266).
To Next Page
Loading...
