When this function is enabled and the camera
t.ti_#l_;;i_ii_J_ remains unused for 2 or 5 minutes, it is turned off.
Auto power off function prevents leaving the power
on.
_The Auto power off function is disabled during automatic
playing back and discharging, and when a USB connection is
being used.
F --"@ To restore power to the camera @
(_Press the "POWER" button to turn the camera
back on for shooting.
Hold down the "l_q" button for about 1 second to
play back images.
When this function is enabled, you can save power
and get the maximum possible running time from
your batteries.
The LCD monitor darkens when camera is not used
for 10 seconds.
_The LCD power save function is disabled in Continuous AF
and movie mode.
When the LCD monitor is dark, pressing the shutter
button down halfway recovers the LCD monitor
brightness.
Pressing any other button as well as the shutter button wakes
the camera up.
Initialize (format) the xD-Picture Card for use with
the camera.
Because initializing the xD-Picture Card erases all
the frames (files), including protected frames (files).
Back up important frames (files) onto your PC or
another media.
Press '.,11"or "i1_"to select 'OK".
Pressing the 'MENU/OK" button erases all the
frames (files) and initializes the xD-Picture
Card.
_f_When ]CARD ERROR], ]WRITE ERROR], ]READ ERROR]
or [CARD NOT INITIALIZED] appears, see P.122 for
information before formatting the xD-Plcture Card.
This function sets a time difference relative to the date and time currently set. When this setting is
enabled, the specified time difference is applied when pictures are taken.
Use this function when traveling to destinations in different time zones.
_ Press ' ilb"
Press 'A" or 'V" to change between "1£i," HOME
and "-'1." LOCAL.
To set the time difference, select '-'t." LOCAL.
t£_ HOME: Your home time zone
LOCAL: Your destination time zone
2
t I _ L
•_TIMEDIFFERENCE
r\
,'1)Press '_1".
Press "A" or "_!'" to select "TIME DIFFERENCE".
09
¢e
96 97
To Next Page
Loading...
