9.5 Replication
Send Settings Information Description
Target System The IP address and replication status for each configured
replication target (up to two). Click to specify a
replication target (see "Replication Configuration" on
page 251).
Status
l Ready - (Green) The system is ready to perform
replication.
l In Progress - (Blue) A replication job is currently in
progress.
l Queued - (Blue) A replication job is queued and will
continue when the system is ready.
l Partial - (Yellow) A replication job was partially
completed. Generate a replication report to see the
files that were not replicated (see "Reports" on page
380).
l Manually Paused - (Yellow) Replication was
manually paused. To resume replication, click
Resume.
l System Paused - (Yellow) The system has
automatically paused replication due to a problem,
for example, low disk space or a problem on the
target system.
To see more information about the problem that
occurred, click Admin at the top of the remote
management console to view administration alerts
(see "Admin Alerts" on page 407). You may also need
to view alerts on the target. In addition, make sure
that the system is an allowed replication source on
the target (see "Replication Configuration" on page
251).
l Failed - (Red) A replication job was not completed.
l Internal Error - (Red) An error occurred during
replication.
ETERNUS CS800 181
To Next Page
Loading...
