8.4 OST Wizard
Figure 109: VTL Wizard: Map Remote Hosts
Step 6: Confirm
1. Review the settings you selected to make sure they are correct (see "VTL Wizard:
Confirm" on page 146). If necessary, click Previous to return to a previous step to
make changes.
2. To make changes to a VTL partition, media, or host access group you added, first
select the item and click Delete to delete it. Then click Previous to return to the
appropriate step and add a new item.
3. After you have confirmed all settings, click Finish. The wizard configures the ETERNUS
CS800 with the settings you selected.
Figure 110: VTL Wizard: Confirm
8.4 OST Wizard
The OST wizard provides guided assistance for configuring the ETERNUS CS800 to present
its storage as one or more OST (OpenStorage) storage servers for use with a backup
application. The wizard guides you through the process of adding one or more OST storage
ETERNUS CS800 146
To Next Page
Loading...
