Fujitsu ETERNUS CS800 S6 User Manual

5.3 Cabling the ETERNUS CS800 S6 System
least one of the LAN ports must be connected.
3. If your CS800 also provides FC ports: Connect them to the SAN or directly to the
appropriate devices.
5.3.2 Entry System with ETERNUSJX40 S2 Option
There are four different versions of the Entry model with the JX40 option, which can be
distinguished by the ports respectively the PCI slots used in the server, see table "Usage of
PCI Slots - Entry System, with JX40 S2 option" on page 51.
Optionally up to three ETERNUS JX40 S2 storage modules can be connected to the server to
provide a disk capacity of more than 24TB (up to 120TB).
Please refer to the pictures below to identify the model and to see which ports can be
connected to the LAN and SAN and how to connect the optionally available JX40 modules.
Figure 64: Entry System without 8 Gb/s Fibre Channel and without 10 Gb/s Ethernet
ETERNUS CS800 91

Fujitsu ETERNUS CS800 S6 Specifications

General

Storage drives installed	-
Installed storage drive type	HDD
Total installed storage capacity	- TB
Maximum supported storage capacity	24 TB
Chassis type	Rack (2U)
Certification	CSA-C22.2 No. 60950-1, GOST-R, UL 60950-1, EN 60950-1, IEC 60950-1, CNS 13438, FCC Part-15 Class A, ICES 003 Class A, BSMI Class A, C-Tick, AS/NZ CISPR 22 Class A, EN 55022 Class A, VCCI Class A
Product color	Black
Sustainability certificates	RoHS
RJ-45 ports quantity	1
Remote management port	RJ-45 (Gigabit)
AC input voltage	200-240 V
AC input frequency	50 - 60 Hz
Power supply unit (PSU) capacity	290 W
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	20 - 80 %
Software support	Atempo (Time Navigator), Commvault Software, Computer Associates (BrightStor ARCserve Backup), EMC (NetWorker), HP (DataProtector), IBM (Tivoli Storage Manager), Quest (NetVault, vRanger), Veritas (Backup Exec, NetBackup), Veeam (Backup & Replication)

Weight and Dimensions

Depth	770 mm
Width	482.6 mm
Height	88.9 mm
Weight	25000 g