11.5 Actions
l Locked - The partition is not allowed to receive new Cartridge Based Replication
data.
l Unlocked - The partition is allowed to receive new Cartridge Based Replication
data.
If a partition configured for Cartridge Based Replication is locked on the target system,
synchronization jobs may fail on the source system.
5. Click Apply.
Unpack Queue
Use the Unpack Queue to view Cartridge Based Replication statistics for data received
from the source system.
To view the Unpack Queue, select a partition and click View Unpack Queue (see "Unpack
Queue" on page 377).
Figure 262: Unpack Queue
The Unpack Queue displays the following information:
Barcode The barcode of the cartridge to be replicated.
State The replication state of the cartridge.
Click Refresh to update the statistics in the Unpack Queue. Click OK to return to the
Cartridge Based page.
11.5 Actions
The Actions page allows you to manage replication activity on the ETERNUS CS800. You
can pause the replication service, enable the replication state, and clear performance
statistics.
To access the Actions page, click the Replication menu, and then click the Actions tab (see
"Actions Page" on page 378).
ETERNUS CS800 377
To Next Page
Loading...
