5.3 Cabling the ETERNUS CS800 S6 System
LAN Cabling (SCALE)
Serv. Onb. LAN1
CE CM0 MNT
CE CM0 MNT
Serv. Onb. LAN1
Server Slot7 P1
CE CM1 MNT
CE CM1 MNT
Server Slot7 P1
FC Cabling (SCALE)
Server Slot2 P1
CE CM0 CA0 P0
CE CM0 CA0 P0
Server Slot2 P1
Server Slot8 P1
CE CM1 CA0 P0
CE CM1 CA0 P0
Server Slot8 P1
JX40 Modules (ENTRY)
JX40-1 JX40-1 JX40-1 JX40-1 JX40-1 JX40-1
JX40-2 JX40-2 JX40-2 JX40-2 JX40-2 JX40-2
JX40-3 JX40-3 JX40-3 JX40-3 JX40-3 JX40-3
5.3.1 Entry System without ETERNUSJX40 S2 Option
There are four different versions of the Entry model without the JX40 option which can be
distinguished by the ports respectively the PCI slots used, see table "Usage of PCI Slots -
Entry System, without JX40 S2 option" on page 53.
Please refer to the pictures below to identify the model and to see which ports can be
connected to the LAN and SAN.
Figure 60: Entry System without 8 Gb/s Fibre Channel and without 10 Gb/s Ethernet
ETERNUS CS800 89
To Next Page
Loading...
