10.8 Notifications
Figure 191: On Demand Page
Tasks
Use the On Demand page to perform the following tasks:
l Manually send a status data or configuration data report (see "Sending a Report" on
page 279).
l View a configuration data report (see "Viewing Configuration Data" on page 279).
Sending a Report
To manually send a status data or configuration data report:
1. Under Email Type, select the type of report to send (Status data or Configuration
data).
2. In the Send To box, enter the e-mail address of the recipient.
3. Click Send.
Viewing Configuration Data
To view a configuration data report:
1. Under Email Type, select Configuration data.
2. Click View.
The System Configuration Report window displays.
3. (Optional) Click Save to save a local copy of the report in TXT format.
10.8.2 SNMP
The SNMP page allows you to configure the ETERNUS CS800 to send status messages using
SNMP (Simple Network Management Protocol). The ETERNUS CS800 supports SNMP v2c
only.
ETERNUS CS800 279
To Next Page
Loading...
