10.8 Notifications
To enable the ETERNUS CS800 to send e-mail, you must specify an outgoing e-
mail server (see "Server" on page 276).
To access the Email Reports page, on the Email page, click the Email Reports tab.
The Email Reports page contains the following tabs:
l "Recipients" on page 278
l "On Demand" on page 278
Recipients
The Recipients page allows you to specify the e-mail recipients who will receive all
scheduled status data and configuration data reports.
To configure the schedule when e-mail reports are sent, use the Configuration >
Scheduler page (see "Scheduling E-mail Reports" on page 268).
To access the Recipients page, on the Email Reports page, click the Recipients tab (see
"Recipients Page" on page 278).
Figure 190: Recipients Page
Enter the e-mail addresses of up to four recipients in the boxes, and then click Apply.
When the ETERNUS CS800 generates scheduled e-mail reports, they will be sent to the
specified addresses.
On Demand
The On Demand page allows you to manually generate a status data or configuration
data report. The report is immediately sent to the specified e-mail recipient. You can also
view configuration data.
To access the On Demand page, on the Email Reports page, click the On Demand tab (see
"On Demand Page" on page 279).
ETERNUS CS800 278
To Next Page
Loading...
