2.10 ETERNUS CS800 Advanced Reporting
l ASG-Time Navigator™
l Commvault™ Simpana™
An up-to-date list of the supported backup applications is provided by the most current
ETERNUS CS800 Support Matrix.
2.10 ETERNUS CS800 Advanced Reporting
Fujitsu Technology Solutions ETERNUS CS800 Advanced Reporting works with all ETERNUS
CS800-Series disk backup systems. ETERNUS CS800 Advanced Reporting combines
comprehensive performance data logging with powerful visual reporting and analysis
tools to help you identify potential problems and optimize system operation. For more
information, refer to the Advanced Reporting User’s Guide.
2.11 Network Configuration
During network configuration, each individual interface on the ETERNUS CS800 can be
configured as a subnet with its own network settings. Each physical Ethernet port can be
configured as an interface. In addition, you can also create bonded interfaces (logical
ports) consisting of two or more physical ports.
Keep in mind that any traffic can pass through any of the configured Ethernet ports. This
means that the routing of different traffic types, as well as firewall capability, must be
controlled using the network infrastructure (routers and switches) that the ETERNUS CS800
is connected to.
For more information about configuration network settings, see "Network" on page 293.
Each configured network interface requires its own set of network settings (IP
address, network mask, and gateway).
CAUTION!
For effective bonded network use, a properly configured network switch is required.
The ETERNUS CS800 bonding settings must match the switch settings. If the switch
settings and the ETERNUS CS800 settings do not match, your system may become
inaccessible through the switch.
Each configured network interface requires its own set of network settings (IP
address, network mask, and gateway). of Linux.
ETERNUS CS800 37
To Next Page
Loading...
