17.1 Storage Expansion - Entry
Storage Expansion starting with 24TB or more" on page 452.
3. Reboot the ETERNUS CS800 via the remote management pages, see "Reboot &
Shutdown" on page 430. When the system boots up, a background initialize procedure
is started. The new disks are automatically integrated into the system and put into
service. No further actions are required.
Figure 319: Entry system without JX40 S2 - second extension (24TB)
Figure 320: Entry system with JX40 S2 - second extension (24TB)
17.1.3 Procedure of Storage Expansion starting with 24TB or more
If the server of the Entry model is already fully equipped with disks, further capacity
enhancement is supported by connecting up to three ETERNUS JX40 S2 storage modules.
The enhancement can be done in up to six steps with 16TB each up to a maximum of
120TB in total.
Figure "Disk bays in JX40 S2 used for storage expansion from 24TB to up to 120TB" on
page 453 shows how many storage modules must be connected and which slots of them
have to be filled up with disks to reach each supported increment of capacity. Always six
or a multiple of six 3.5” 4TB Nearline SAS 7,200 rpm hard disks must be inserted.
ETERNUS CS800 452
To Next Page
Loading...
