10.4 OST Configuration
To delete a storage server:
Select the storage server in the Storage Server List.
You cannot delete a storage server if it has more than zero currently active connections.
The number of active connections is displayed on the OST page (see "Storage Server List"
on page 231). Also, you cannot delete a storage server if it contains LSUs. Before deleting
the storage server, you must first delete any LSUs it contains (see "Deleting an LSU" on
page 244).
You can select multiple storage servers to delete at once.
Click Delete.
10.4.3 LSU
The LSU page allows you to manage the logical storage units (LSUs) contained on OST
storage servers on the ETERNUS CS800. You can view information about existing LSUs, add
or edit LSUs, and delete LSUs.
To access the LSU page, on the OST page, click the LSU tab (see "LSU Page" on page 238).
Figure 166: LSU Page
Tasks
Use the LSU page to perform the following tasks:
l View information about existing LSUs (see "Logical Storage Unit List" on page 239).
l Add a new LSU to the system (see "Adding an LSU" on page 239).
l Edit properties for an existing LSU (see "Editing an LSU" on page 242).
l Delete an LSU from the system (see "Deleting an LSU" on page 244).
ETERNUS CS800 238
To Next Page
Loading...
