10.4 OST Configuration
Figure 163: Storage Servers Page
Tasks
Use the Storage Servers page to perform the following tasks:
l View information about existing storage servers (see "Storage Server List" on page
231).
l Add a new storage server to the system (see "Adding a Storage Server" on page 232).
l Edit properties for an existing storage server (see "Editing a Storage Server" on page
236).
l Delete a storage server from the system (see "Deleting a Storage Server" on page 237).
Storage Server List
The Storage Server List displays the following information for all storage servers on the
ETERNUS CS800:
Storage Servers The number of storage servers that have been added to
the system.
Maximum Storage Servers The maximum number of storage servers that can be
added to the system.
LSUs The number of logical storage units (LSUs) that have
been added to the system (see "LSU" on page 238).
OST Service The status of the OST service. OST settings can be
configured in Ready, Stopped, or Verifying state. The OST
server is available for backup only in Ready state.
Name The name of the storage server.
ETERNUS CS800 231
To Next Page
Loading...
