18 System Specifications S6
This chapter lists characteristics and specifications of the ETERNUS CS800 S6 product.
The characteristics and specifications are categorized as follows:
System Related Specifications
The following tables provide characteristics of the ETERNUS CS800 S6 system.
General Characteristics
NAS backup target NFS and/or CIFS/SMB mount point
128 shares maximum
OpenStorage (OST) Symantec Storage Servers and Logical Storage Units
(LSUs) 100 storage servers maximum Support for
Optimized Duplication
VTL l Scale with FC option: 64 partitions maximum, 256
virtual drives maximum, 9000 virtual cartridges per
partition
l Entry with FC option: 64 partitions maximum, 80
virtual drives maximum, 9000 virtual cartridges per
partition
Inline Deduplication Inline data flow provides deduplication with an optimal
combination of total system performance, manageability
and value. Optionally shares or partitions without
deduplication enabled can be used to store data not
suitable for deduplication.
Replication Support for remote replication. Replication is
asynchronous, one-to-one or multiple-to-one
configurations; shares in the same unit act as replication
source or target; units with shares acting as replication
targets can also support local backup.
Performance In-line data flow throughput up to 9 TB/h
Path-to-Tape (optional for an
Entry and a Scale system)
Direct tape creation without using media server or
backup SAN Support for OST Direct to Tape
Table 30: General Characteristics
ETERNUS CS800 461
To Next Page
Loading...
