Fujitsu ETERNUS CS800 S6 - Manage Users

10.9 System
CAUTION!
Once encrypted, data on the storage array cannot be changed to non-encrypted
data.
Monitor Initial Encryption
During initial encryption an "Initial Encryption" progress bar is displayed, which informs
about the percentage of data already encrypted.
10.9.4 Manage Users
The Manage Users page allows you to create and manage local authenticated users for
use with the OpenStorage (OST), Oracle Recovery Manager (RMAN), and path to tape (PTT)
capabilities.
OpenStorage (OST) and Oracle Recovery Manager (RMAN)
After you create OST or RMANuser credentials, enter them in the backup application to
authenticate on the media (OST) or Oracle (RMAN) server.
When using OST Automatic Image Replication (AIR), the remote user credentials
specified on the source ETERNUS CS800 must match the local user credentials on
the target (remote) ETERNUS CS800.
Path to Tape (PTT)
The following applications are supported for backup application specific path to tape:
l Veritas NetBackup
l Veritas Backup Exec
l EMC Networker
l Oracle Secure Backup
l ASG-Time Navigator
l Commvault™ Simpana™
An up-to-date list of the supported backup applications is provided by the most current
ETERNUS CS800 Support Matrix.
You must dedicate a partition within the ETERNUS CS800for use with NetBackup
Direct to Tape (Path to Tape). The partition cannot be shared with another
backup application.
CAUTION!
The virtual media changer and tape drives must be assigned to the backup server
(on the SAN) being used for Backup Application Specific path to tape functionality.
ETERNUS CS800 331