Fujitsu ETERNUS CS800 S6 - ETERNUS CS800 S6 Hardware

16.1 ETERNUS CS800 S6 Hardware
16.1 ETERNUS CS800 S6 Hardware
Server PRIMERGY RX2540 M1
1. Removing the defective PSU module
Figure 304: Removing the PSU
l Press in on the green locking latch (1).
l Fold up the handle on the PSU module (2).
l While keeping the green locking latch pressed, pull the PSU module out of its slot
(3).
2. Installing the new PSU module
ETERNUS CS800 441