14.3 Analyzer
Or clear the check box to disable the healthcheck.
3. Click Apply.
When healthchecks are run (manually or scheduled), only enabled healthchecks
are run.
CAUTION!
If a healthcheck fails when it is run, there may be a problem in the blockpool that
could cause replication or restore operations to fail. Contact Fujitsu Technology
Solutions customer support if a healthcheck fails.
14.3 Analyzer
The Analyzer page allows you to analyze the network and disk performance of the
ETERNUS CS800.
To access the Analyzer page, click the Utilities menu, and then click the Analyzer tab.
The Analyzer page contains the following tabs:
l "Network Analyzer" on page 420
l "Disk Analyzer" on page 422
Network Analyzer
The Network Analyzer page allows you to analyze network performance by measuring
network throughput between the ETERNUS CS800 and another system (such as another
ETERNUS CS800 system).
To access the Network Analyzer page, on the Analyzer page, click the Network tab.
The Network Analyzer page contains the following tabs:
l "Performance" on page 420
l "Settings" on page 421
Performance
The Performance page allows you to perform network analysis with another system (the
target). You can also view results from the most recently run test
To access the Performance page, on the Network Analyzer page, click the Performance
tab (see "Performance Page" on page 421).
ETERNUS CS800 420
To Next Page
Loading...
