14.2 Diagnostics
Figure 293: Status Page
The Status page displays the following information about the most recently run test for
each healthcheck:
Healthcheck Name The name of the healthcheck.
State The state of the healthcheck (enabled or disabled).
Started The time the healthcheck started
Finished The time the healthcheck ended.
Status The status of the healthcheck (Success or Failed).
If running a healthcheck results in the Contact Support
status, contact Fujitsu Technology Solutions Customer
Support for further assistance.
To enable or disable a healthcheck:
1. Select the healthcheck and click Edit.
The Edit Healthcheck page displays (see "Edit Healthcheck Page" on page 419).
Figure 294: Edit Healthcheck Page
2. Select the check box to enable the healthcheck.
ETERNUS CS800 419
To Next Page
Loading...
