Fujitsu ETERNUS CS800 S6 - Hard Drive Carrier

3.3 Hard Drive Carrier
3.3 Hard Drive Carrier
2.5" hard drive carriers
2.5" hard drive carriers are used in the server module. Each 2.5" hard drive carrier has two
LED indicators (see the figure below) which are described in the table below.
Figure 45: 2.5" Hard Drive Disk Indicator
Item Colour Description
1 green HDD BUSY
l Lights up: HDD in active phase
l Does not light: HDD inactive (drive inactive)
2 orange HDD FAULT
l Does not light: no HDD error
l Lights up: HDD faulty or rebuild stopped (drive defective/needs
replacing, a rebuild process was stopped or the HDD module is not
correctly inserted)
l Slow flashing: HDD Rebuild (the data is being restored after changing a
drive)
l Fast flashing: HDD Identify
l Four fast blinks/pause: HDD Predicted Fault
l Two fast flashes/pause: HDD Hot Spare (Hot spare drive active. The
corresponding drive has failed).
Table 17: 2.5" Hard Drive Disk Indicator
ETERNUS CS800 70