10.3 VTL Configuration
applications. You can add virtual tape drives and storage slots to VTL partitions, as well
as create and work with virtual tape cartridges. You can also map partitions to hosts.
Additional Information
Virtual Tape Library (VTL) is available only on the ETERNUS CS800 VTL and Multi-Protocol
configurations.
The VTL wizard provides guided assistance for configuring VTL partitions (see
"Configuration Wizards" on page 132).
To access the VTL page, click the Configuration menu, and then click the VTL tab.
The VTL page contains the following tabs:
l "Partitions" on page 204
l "Media" on page 211
l "Remote Host Access" on page 220
10.3.1 Partitions
The Partitions page allows you to manage VTL partitions on the ETERNUS CS800. Use
partitions to allocate the virtual tape drives and storage elements to separate partitions
that can be accessed by different host systems.
To access the Partitions page, on the VTL page, click the Partitions tab.
The Partitions page contains the following tab:
l "Partitions Summary" on page 204
10.3.1.1 Partitions Summary
The Partitions Summary page allows you to view information about existing partitions.
You can also add or edit partitions, and delete partitions.
To access the Partitions Summary page, on the Partitions page, click the Summary tab
(see "Partitions Summary Page" on page 205).
ETERNUS CS800 204
To Next Page
Loading...
