Fujitsu ETERNUS CS800 S6 - Additional Specifications

18.1 Additional Specifications
18.1 Additional Specifications
Entry Model
Selected Server Specifications
Weight 25 kg + 35 kg per JX40 S2 (up to 130 kg)
Disks 4 × 2.5" 600GB (one-CPU model) SAS hard disk or 6 x 2.5"
900GB (two-CPU model) SAS hard disk (10,000 rpm)
and 6 or 12 or 18 × 2.5" 2TB SATA hard disks (7,200 rpm)
Interface to JX40 S2 Storage
Module
PRAID EP420e Controller
Service Port 1 GbE
iRMC Port (Console Device) 1 GbE
Internal RAID Controller LSI GEN3 – SAS 6G
RAID Level RAID 1 (1 + 1) for Operating System, StorNext and
blockpool metadata RAID 6 (4+2) for backup data
Table 37: Selected Server Specifications for Entry
Selected ETERNUS JX40 S2 Storage Module Specifications
Weight Approx. 35 kg (depending on the upgrading)
Disks 6 or 12 × 3.5" 2TB SATA hard disks (7,200 rpm)
Interface to Server SAS
RAID Level 1 to 4 x RAID 6 (4 + 2)
Table 38: Selected Storage Module Specifications for ETERNUS JX40 S2
Scale Model
Selected Server Specifications
Weight 60 + 35 kg per expansion module (up to 410 kg)
Disks 16 × 2.5" 900 GB SAS hard disks (10,000 rpm);
including 2 Hot Spare
Interface to DX100 S3 Storage
Module
2 x 8 GbFC
Service Port 1 GbE
iRMC Port (Console Device) 1 GbE
Internal RAID Controller LSI GEN 3 – SAS 6G
ETERNUS CS800 464