10.2 NAS Configuration
10.2 NAS Configuration
The NAS page allows you to configure the ETERNUS CS800 to present its storage capacity
as NAS (network attached storage) shares that are compatible with standard backup
applications. You can create NAS shares for use with Windows or Linux networks. You can
also join the ETERNUS CS800 to a Windows domain or workgroup and manage users.
Additional Information
l Network Attached Storage (NAS) is available only on the ETERNUS CS800 NAS and
Multi-Protocol configurations.
l The NAS wizard provides guided assistance for configuring NAS shares (see
"Configuration Wizards" on page 132).
CAUTION!
Filenames on NAS shares are limited to a length of 256 bytes. If a filename uses
Japanese characters, the filename can be no longer than 85 characters. This is
because each Japanese character is represented by 3 bytes.
To access the NAS page, click the Configuration menu, and then click the NAS tab.
The NAS page contains the following tabs:
l "NAS Summary" on page 188
l "Windows Domain" on page 195
l "Share Access" on page 198
l "Advanced Setting" on page 203
10.2.1 NAS Summary
The NAS Summary page allows you to manage NAS shares on the ETERNUS CS800. You can
view information about existing shares, add or edit shares, and delete shares.
To access the NAS Summary page, on the NAS page, click the Summary tab (see "NAS
Summary Page" on page 189).
ETERNUS CS800 188
To Next Page
Loading...
