Fujitsu ETERNUS CS800 S6 - Page 205

10.3 VTL Configuration
Figure 149: Partitions Summary Page
Tasks
l Use the Partitions Summary page to perform the following tasks:
l View information about existing VTL partitions (see "Partition List" on page 205).
l Add a new VTL partition to the system (see "Adding a VTL Partition" on page 206).
l Edit properties for an existing VTL partition (see "Editing a VTL Partition" on page
209).
l Delete a VTL partition from the system (see "Deleting a VTL Partition" on page 210).
l Change the mode of a partition (see "Changing Partition Mode" on page 211).
Partition List
The Partition List section displays the following information for all VTL partitions on the
ETERNUS CS800:
Available Partitions The number of partitions that have been added to the
system and the maximum number of partitions that can
be added.
Available Virtual Tape Drives The number of virtual tape drives that have been added
to the system and the maximum number of drives that
can be added.
Name The name of the partition.
Mode The current mode of the partition (Online or Offline).
Model The library model emulated by the partition.
ETERNUS CS800 205