10.4 OST Configuration
2. Enter information about the storage server:
If you are editing a storage server, the Name option cannot be changed.
Description (Optional) Enter a brief description of the storage
server.
Max Connections Enter the maximum number of connections allowed
to the storage server (3 to 65536).
The maximum number of connections cannot be
changed if the storage server has more than zero
currently active connections. The number of active
connections is displayed on the OST page (see
"Storage Server List" on page 231).
Fujitsu Technology Solutions recommends
setting Max Connections to 300.
Enable Concurrent Optimized
Duplication
Select the check box to enable optimized duplication
during OST ingest.
Concurrent Optimized Duplication is disabled by
default. If enabled, as data is written to the storage
server, it is simultaneously replicated to the target
ETERNUS CS800. When optimized duplication or
Automatic Image Replication subsequently occurs,
the operation is more efficient because a portion of
the required data has already been replicated to the
target storage server.
When Concurrent Optimized Duplication is
enabled, all data on the storage server is
duplicated, not just the specified images.
3. Select the check box for each optimized duplication target you want to duplicate the
storage server to. When the storage server is duplicated, its data will be sent to all
selected targets.
4. Click Apply.
Deleting a Storage Server
Delete a storage server if it is no longer needed. When you delete a storage server, all
data stored on the storage server is lost.
If you deleted the storage server from Symantec NetBackup or Symantec Backup Exec,
you must wait several minutes before deleting the storage server from the ETERNUS
CS800.
ETERNUS CS800 237
To Next Page
Loading...
