10.4 OST Configuration
7. If Automatic Image Replication is enabled, select the replication target you want to
replicate images to. (You can select only a single target.) When images are replicated,
data will be sent to the selected target.
8. If Automatic Image Replication is enabled, specify the following information:
Remote Storage Server
Name
The name of the remote storage server (on the target
ETERNUS CS800) to replicate data to. The source ETERNUS
CS800 and target ETERNUS CS800 must reside in different
NetBackup domains.
To configure the target ETERNUS CS800, see
"Replication Send" on page 347.
Remote LSU Name The name of the LSU in the remote storage server that will
receive the replicated data.
Remote User The OST user credentials to use for authentication on the
remote (target) ETERNUS CS800. The selected remote user
must match a local user on the Configuration > OST >
Manage Users page on the target ETERNUS CS800 (see
"Manage Users " on page 331).
9. Click Apply.
Editing a Storage Server
Edit a storage server to change the description of the storage server or the maximum
number of allowed connections.
To edit a storage server:
1. Select the storage server and click Edit.
The Edit Storage Server page displays (see "Edit Storage Server Page" on page 236).
Figure 165: Edit Storage Server Page
ETERNUS CS800 236
To Next Page
Loading...
